Connecting To A Conference - Polycom RMX 2000 Getting Started Manual

Chapter 3-Basic Operation

Connecting to a Conference

3-20
To dial into a conference or Meeting Room, participants must be provided
with a dialing string which can vary according to your network type,
conference password and chairperson password.
Participants dial the conference dial-in string and are connected to the
conference IVR Service. Once the correct information, such as the
conference password and chairperson password are entered, the
participants are connected to the conference.
IP Endpoint
SIP Endpoint
Maple_room@polycom.com
IP Endpoint
Dial-in Connection via IVR System
The chairperson can use the chairperson password as the conference
password and does not need to enter the conference password.
Participant connecting to an HD conference must have HD capabilities and use
the same bit rate as defined for the conference, otherwise they will be
connected as Secondary (audio only participants).
MCU
MCU Prefix in
Gatekeeper - 925
Network
Maple_Room
Conference ID: 1001
Password: 34567
Oak_Room
Conference ID: 1002
Password: 71356