Polycom RMX 2000 Getting Started Manual page 67

Table 3-3 New Conference – Participants Tab (Continued)
Column / Button
IP Address/Phone
Alias Name/SIP
Address (IP Only)
Network
Dialing Direction
Encryption
Buttons
New
Remove
Add from Address
Book
Polycom RMX 2000 Getting Started Guide
Description
Indicates the IP address or phone number of the
participant's endpoint.
•
For dial-out connection, displays the IP address or
phone number of the endpoint called by the
Polycom RMX 2000.
•
For dial-in connection, displays the participant's IP
address or phone number used to identify and
route the participant to the appropriate
conference.
Displays the alias name of an H.323 endpoint or the SIP
URL.
The network communication protocol used by the
endpoint to connect to the conference: H.323, SIP or
ISDN/PSTN.
Dial-in – The participant dials in to the conference
Dial-out – The RMX dials out to the participant
Displays whether the endpoint uses encryption for its
media.
The default setting is Auto, indicating that the endpoint
must connect according to the conference's encryption
setting.
Note: The H.320 protocol (ISDN/PSTN) does not
support encryption.
Click to define a new participant.
For more information, see the RMX 2000
Administrator's Guide, "Adding a new participant to the
Address Book" on page 4-4.
Click to remove the selected participant from the
conference.
Click to add a participant from the Address Book to the
conference.
3-17