Fast Configuration Wizard - Polycom RMX 2000 Getting Started Manual

Chapter 2-First Time Installation and Configuration
2-12

Fast Configuration Wizard

1 Enter the required IP information in the dialog box.
Table 2-2 Fast Configuration Wizard – IP Signaling
Field
Network Service
Name
Signaling Host IP
Address
MPM 1 IP
Address
MPM 2 IP
Address
Description
The name Default IP Service is assigned to the IP
Network Service by the Fast Configuration Wizard.
This name can be changed.
Note: This field is displayed in all IP Signaling dialog
boxes and can contain character sets that use
Unicode encoding.
Enter the address to be used by endpoints when
dialing in to the MCU.
Dial out calls from the RMX are initiated from this
address.
This address is used to register the RMX with a
Gatekeeper or a SIP Proxy server.
Enter the IP address of MPM 1 and MPM 2 (if
installed) as provided by the network administrator.
Endpoints connect to conferences and transmit call
media (video, voice and content) via these
addresses.