Polycom RMX 2000 Getting Started Manual page 29

Table 2-2 Fast Configuration Wizard – IP Signaling (Continued)
Field
Subnet Mask
If Secured Communication is required on the RMX: Complete the Fast
Configuration Wizard, Login, install the Certificate and then enable
Secured Communication Mode.
2
Click Next.
3
Enter the required Routers information in the dialog box.
Table 2-3 Fast Configuration Wizard – Routers
Field
Default Router
IP Address
4
Click Next.
Polycom RMX 2000 Getting Started Guide
Description
Enter the subnet mask of the MCU.
Default value: 255.255.255.0.
Description
Enter the IP address of the default router.
2-13