Polycom RMX 2000 Getting Started Manual page 40

Chapter 2-First Time Installation and Configuration
2-24
23 The Phones dialog box opens.
24 Click Add to define dial-in number ranges.
The Add Phone Number dialog box opens.
25 Define the following parameters:
Table 2-11 Fast Configuration Wizard – Add Phone Numbers
Field
First Number
Last Number
A range cannot exceed 1000 numbers.
26 Click OK.
The new range is added to the Dial-in Phone Numbers table.
27 Optional. Repeat steps 24 to 25 to define additional dial-in ranges.
28 In the Phones tab enter the MCU CLI (Calling Line Identification).
Description
The first number in the phone number range.
The last number in the phone number range.