Polycom RMX 2000 Getting Started Manual page 45

Table 2-12 Fast Configuration Wizard – System Flags (Continued)
Field
Terminate
Conference
when
Chairperson
Exits
Auto Extend
Conferences
These flags can be modified later, if required, by selecting the System
Configuration option from the Setup menu. For more information, see
the RMX 2000 Administrator's Guide, "System Configuration" on
page 12-5.
36 Click Save & Close.
The RMX confirms successful configuration.
37 In the Success Message box, click OK.
Polycom RMX 2000 Getting Started Guide
Description / Default
When Yes is selected (default), the conference ends
when the chairperson exits even if there are other
participants connected.
When No is selected, the conference automatically ends
at the predefined end time, or when all the participants
have disconnected from the conference.
When Yes is selected (default), allows conferences
running on the RMX to be automatically extended as long
as there are participants connected and there are
available resources.
The maximum extension time allowed by the MCU is 30
minutes.
2-29