Rmx's Default Conferencing Settings - Polycom RMX 2000 Getting Started Manual

Chapter 2-First Time Installation and Configuration

RMX's Default Conferencing Settings

2-32
The RMX is shipped with default conferencing entities, which allow RMX
users and participants to start ongoing conferences without further
configuration.
The default conferencing entities are:
Table 2-13 Conferencing Entities
Entity
Meeting Rooms
Conference
Profile
Conference IVR
Service
Description
Conferences saved on the MCU without using resources.
They are activated when the first participant dials in.
There are four Meeting Rooms ready for use:
Name ID
Maple_Room 1001
Oak_Room 1002
Juniper_Room 1003
Fig_Room 1004
Each Meeting Room uses the default Conference Profile
called Factory Video Profile running at 384Kbps and has
a default duration of one hour.
Name: Factory Video Profile
A Conference Profile is assigned to a Meeting Room to
define its conferencing parameters, such as line rate and
video resolution.
Factory Video Profile contains the video conference
parameters with a bit rate of 384Kbps, Auto Layout and
Polycom Skin. The Profile uses an IVR Service called
Conference IVR Service.
Name: Conference IVR Service
The Conference IVR Service includes an optional video
slide and all the voice messages played during the
participant's connection process and during the
conference.
The Conference IVR Service contains a set of voice
prompts in English and an optional video slide.
It automates the participant's connection to a conference.