Rear Brakes Adjustment - GE Vivid 7 Service Manual

GE H
EALTHCARE
D FC091194, R
IRECTION EVISION
6-8-3

Rear Brakes Adjustment

6-8-3-1 Manpower
2 persons, 1 hour
6-8-3-2 Tools
• Hexagon key 3/32 inch
• Phillips screw driver size 2
6-8-3-3 Preparations
1.) Remove Filter Cover , see
2.) Remove Lower Rear Cover , see
3.) Remove the Caster , see
6-8-3-4 Rear Brakes Adjustment
1.) Use a 3/32 inch hexagon key to adjust the brake until the space between brakedogs and tires are
approximate 2 mm.
1.) Replace the Caster and tightly fasten it with four screws.
2.) Install Lower Rear Cover , see
3.) Install Filter Cover , see
WARNING WARNING Use extreme caution in the next two steps. The scanner will be unstable.
4.) Remove the Wooden Wedge.
5.) Roll the system off the Bevel Edged Board.
6 - 12
11
"Upper Rear Cover Removal Procedure" on page
"Lower Rear Cover Removal Procedure" on page
"Rear Casters Removal Procedure" on page 8-92
Figure 6-7 Rear Brakes adjustment
"Lower Rear Cover Installation Procedure" on page
"Upper Rear Cover Installation Procedure" on page
Section 6-8 - Direction Lock and Brake Adjustment
V 7 S M
IVID ERVICE ANUAL
8-6.
8-10.
8-10.
8-6.