Leds On Modem - GE Vivid 7 Service Manual

GE H
EALTHCARE
D FC091194, R
IRECTION EVISION
5-10-6

LEDs on Modem

The Modem has ten LEDs on its front.
TD RD
Table 5-85
LED COLOR
- Red
- Red
- Red
- Red
- Red
- Red
- Red
- Red
- Red
- Red
5 - 126
11
CD 56 33 14 OH TR
Figure 5-79 LEDs on Modem's Front Panel
LEDs on Modem
DESCRIPTION
TD (Transmit Data)
RD (Receive Data)
CD (Carrier Detect)
56 (56K Mode)
33 (V.34 Mode)
14 (V.32bis Mode)
OH (Off hook)
TR (Terminal Ready)
EC (Error Correction (V.42))
FX (Fax)
Section 5-10 - Modem (Option)
EC FX
NORMAL STATE
Flashes during use.
Flashes during use.
ON when detecting a carrier from another modem and during
OFF indicates no or broken connection.
During Power On: Briefly Flashing
These LEDs indicates communication speeds above 14 kbs. If
one of this LEDs are ON during communication, it will stay ON
until the modem is reset or connected the next time.
At speeds below 14 kbs, these LEDs are OFF.
ON when dialing, online, or answering a call
Flashes if pulse dialing
Off when modem not in use
ON when the system initializes the modem. It indicates that the
modem is ready for an outgoing or incoming call.
OFF indicates that communication on the RS232 (COM) port has
been broken. The connected (remote) modem will disconnect.
ON: Error Correction (V42) is turned ON
Blinking: Compression turned ON
OFF: Normal operation.
V 7 S
IVID ERVICE
communication.
Always OFF
M
ANUAL