GE Vivid 7 Service Manual page 284

GE H
EALTHCARE
D FC091194, R
IRECTION EVISION
4-2-10-2 Loading Presets from an MO Disk
NOTE: It is not possible to move presets between units with different software versions.
NOTE: You can successfully copy presets from one V7 to another, provided they run the same software
version.
Table 4-4
STEP TASK
1.
Insert the MO disk with the archived
presets into the MOD.
2.
Go to Config (F2) > Admin > Restore
3.
Select the Check box "User defined
Configuration".
4.
Select the MOD as source.
5.
Press RESTORE NOW
6.
Press ALT + E on the alphanumeric
keyboard.
4 - 20
11
Loading Presets
The Restore window is displayed.
The Presets are restored to the System.
The MO disk is ejected.
Section 4-2 - General Procedures
V
IVID
FUNCTION
7 S M
ERVICE ANUAL