GE Vivid 7 Service Manual page 435

GE H
EALTHCARE
D FC091194, R
IRECTION EVISION
5-4-6-2 BEP3.x Description
NOTE: Specifications mentioned about the Back-End Processor (BEP3.x) are minimum requirements.
The actual hardware could exceed these specifications as technology advances.
5-4-6-2-1 The EMC Enclosure House
• A Power Supply (no UPS battery backup)
• An Intel Motherboard with 1 Gbytes of RAM and a single 3.2 GHz P4 processor.
• Six (6x) USB Ports.
-
-
• One (1x) Serial Port
• AGP Analog Video output from the motherboard
• AGP Card (MOLEX) with DVI output (without 4D)
or
AGP Card (ATI) with DVI output (4D) in AGP slot
• Video Frame Grabber Card
• LAN output from the motherboard (10/100 Base T)
• Patient I/O:
-
-
5-4-6-2-2 Use of Expansion Slots on Motherboard
Table 5-61
SLOT #
AGP
1
2
3
4
5
6
11
2x are located on the front of the BEP3
4x are located at the rear of the BEP3
BEP3.0 supports the original serial databus (not USB)
BEP3.2 Supports USB 1.1
Expansion Slots Usage BEP 3.x
FUNCTION
ADD VIDEO CARD WITH DVI
OUTPUT
UNUSED
SCSI CARD
PRAME GRABBER
UNUSED
PC2IPIIB
UNUSED
Chapter 5 - Components and Functions (Theory)
INTERFACE
DIFFERENT TYPES USED FOR
AGP
UNITS WITHOUT AND WITH 4D
PCI
PCI
PCI
PCI
PCI
PCI
V 7 S M
IVID ERVICE ANUAL
NOTES
5 - 89