Table of Contents
Advertisement
GE H
EALTHCARE
D
FC091194, R
IRECTION
EVISION
8-8-11
Software Loading - Software Version v3.x
8-8-11-1
Overview
This software loading procedure covers:
•
Installation of BT'03 software (software version v3.x) on Vivid 7 units.
Refer to
The software for Vivid 7 is divided on two CDs, one CD with the System Software and one with the
Application Software.
8-8-11-2
Vivid 7 System SW Loading - Software Version v3.x
1.) Insert the applicable Vivid 7 System Software CD into the CD drive.
2.) Power down the System, see
3.) Wait until the LCD's on the Operator Panel are switched off and the ON/Standby switch has turned
yellow.
4.) Power ON the System, see
the CD you inserted.
11
Table 8-13 on page 8-46
4-2-3 "Power Shut Down" on page
Figure 8-41 BIOS loading example
Chapter 8 - Replacement Procedures
where you recorded the unit's software versions.
4-2-3 "Power Shut Down" on page
V
7 S
IVID
ERVICE
4-7.
4-7. The scanner will now boot from
M
ANUAL
8 - 47
Advertisement
Table of Contents
Troubleshooting
