Illustration
28A
Figure 28: Locking/Releasing Rear Caster Brakes
Figure 29: Inspecting the Bedside Panel
Figure 30: Inspecting the Bedside Panel Lock
18
2042376-001 Rev G
28B
©2012 General Electric Company. All rights reserved. Lullaby
Description
Follow the instructions given below to
check the rear casters:
1.
Lock the caster brakes as seen in
Figure 28A and check that they
hold the unit in place.
2.
Release the brakes as seen in
Figure 28B and check that the unit
moves smoothly.
Check that all the casters are in firm
contact with the floor and that the
unit is stable by locking the caster
brakes.
Check the operation of the four
bedside panels.
The bedside panels should lock securely
in the upright position as seen in Figure
30.
Warmer
TM