GE Vivid 7 Service Manual page 615

GE H
EALTHCARE
D FC091194, R
IRECTION EVISION
8-7-12-4 Loading Application Software v7.x on Vivid 7 with BEP4.3
NOTE: This procedure describes how to reload software that already has been stored as compressed
files on the BEP4.3's hard disk drive. A CD is not used in this procedure.
To reload application software, follow this procedure:
1.) Reboot the Vivid 7, and press the ESC-key each second. The boot sequence will be interrupted and
a boot-menu appears on the screen.
Normal Startup
Recovery
There are two entries in the menu.
1.) Normal startup
2.) Recovery
Use the arrow keys to select (highlight) your choice.
2.) Select Recovery.
3.) Press Enter to display the System Recovery Menu on the screen, see next page.
11
GNU GRUB version 8.95 (639k lower / 523112X upper memory
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS or "p" to enter a
Password to unlock the next set of features.
Figure 8-23 Select Recovery
Chapter 8 - Replacement Procedures
V 7 S M
IVID ERVICE ANUAL
8 - 27