Security Settings > Mac Control - NetComm N150 User Manual

Security Settings > MAC Control
MAC Control allows you to assign different access rights for different users and to assign a specific IP address to
a specific MAC address.
To enable MAC Address Control please tick the Enable box on the top of the page. Two types of control are available:
• Connection control. Tick the "Connection Control" box to control which clients (wired and wireless) can connect to the unit. If a
client is not able to connect to this device, it means the client can not access to the Internet either. Choose allow or deny to allow or
deny clients with MAC addresses that are not in the list to connect to this device.
• Association control. Tick the "Association Control" to control which wireless client can associate with the unit.
If a client is not able to associate with the unit, it means the client can not send or receive any data via the router. Choose allow or deny to
allow or deny the clients with MAC addresses that are not in the list to associate to the wireless LAN
Click the "Next Page" or the "Previous Page" buttons to see the entire list.
Click "Save" to save the settings or "Undo" to cancel.
3G Wireless N150 Mini Router m1-User Guide
30
YMLM1WN
www.netcomm.com.au