Access Control - NetComm NB304N User Manual

Enter your select NTP server to use for time synchronisation, select your time zone and then click Apply/Save to save the new
Internet Time settings.

Access Control

This feature enables you manage the user access rights for remote access management based on the Services being used, IP
addresses and Passwords.
Passwords
When you configure the router through an Internet browser, the system requires you to enter your user name and password to
validate your access permission. By default, the Username is set to "admin" and the Password to "admin". You can change both
the user and password is required.
Click Apply/Save to save the new user account name or password configuration settings.
Services Control
Select which Services to allow, which ports the services are available on and whether to allow this access from the LAN or the WAN
side connection.
Click Apply/Save to save the new Services control configuration settings.
IP Restriction
The IP restriction page enables you to set a list of IP Addresses able to access the Management Console.
YML304X
NetComm NB304N – ADSL2+ Wireless N300 Modem
49 www.netcomm.com.au