What’s Inside? personal use. It can act as the central connection point for all of your online and calling activities. The Netcomm Wireless device provides Netcomm Wireless NB16WV Set-up Guide Wireless-N speeds for simultaneous downloads, voice and music, online Front Panel gaming, and will allow users to make calls over the Internet using ACN’s...
Netcomm Wireless Getting to Know your Device The table below describes the LED lights on the front panel of your Netcomm NB16WV Set-up Guide Wireless device and their functions. Icon LED Activity Description Power The modem is powered off. The Netcomm Wireless NB16WV ADSL2+ VoIP Wireless Modem Router has been set up to plug and play.
Wireless xxxx devices card, found in wireless security wirelessly to your will be asked for Password: (MBB) the Netcomm card, found in modem. the password or Wireless security Wireless box. the Netcomm SP code. Wireless box. (WPA-PSK):...
Wireless Security Card. You will need this information to connect wireless devices to your network. If you have forgotten your Wi-Fi™ password you are able to change this via the Netcomm Wireless Wizard - this is available on page 17. We recommend you store your Wi-Fi™ Network name and password Once the Modem Router is connected to a power supply, the power in a secure location for future reference.
How to Set-up your Digital Wait approximately 30 seconds for the connection to establish. Repeat for each device. Your Netcomm Wireless device can connect up to 4 Phone Service (DPS) devices simultaneously. Your Wi-Fi™ devices should now be connected and you will be able to access Please refer to the email we sent you upon activation of your DPS service.
DECT handset is powered on, and try these quick tips: If you are unable to make a call check your DPS status in the Netcomm Wireless Wizard and ensure that it is active and registered to your DECT handset.
ADSL Broadband and DPS via the Netcomm Wireless Wizard If you have factory reset your Netcomm Wireless device you will need to re- enter your ADSL broadband and DPS settings: Connect your computer to your Modem Router via an Ethernet cable Open an Internet browser (e.g.
Entering your DPS Settings Please enter or select the following settings. WAN Interface ADSL To manually configure your DPS log in to the Netcomm Wireless Wizard. WAN type PPPoE Select ‘Switch to VoIP/NAS View’. Hover over ‘SIP Settings’ and select ‘Service Domain’.
MyAccount Select Australia, from here you will be redirected to the following page: ACN provides you with the ability to view and manage your account online through MyAccount. You can: • Change your ADSL broadband rate plan • Relocate your ADSL broadband/DPS service to another address •...
(ACN recommends you obtain surge protection for your electricity supply), theft, or heat damage sustained from We will arrange to replace your Netcomm Wireless NB16WV ADSL2+ VoIP the stacking of electrical equipment on or in close proximity to the Product.
Warranty claims guarantee, condition or warranty, our respective liabilities for such breach shall be limited to, at our option: (a) the replacement of the Product or the supply of an equivalent Product or payment of the cost of replacing the Should your Product fail within the DOA/ELF Period or the Warranty Period Product or acquiring an equivalent Product;...
Further Information For the latest rate plans, products and services visit acnpacific.com.au. For further information about pricing, other services available from ACN, the ACN Opportunity or becoming an ACN Independent Business Owner (IBO), please visit acnpacific.com.au.
Need help?
Do you have a question about the NB16WV and is the answer not in the manual?
Questions and answers