Table of Contents
Advertisement
Ethernet Port Status
The Ethernet Port on the router can be configured as either a WAN or a LAN port. The status of the port is shown here. The port
can be changed by selecting an option from the drop-down list.
Current LAN means that the Ethernet port is currently operating as a LAN port. At this time, a computer connected via an Ethernet
Cable can access the Internet (if connected), access connected WiFi devices, and access the router itself for configuration.
Current WAN means that the Ethernet port is currently operating as a WAN port. Connect your DSL or cable modem to obtain an
Internet connection.
WAN
The WAN section displays the WAN Port details.
ITEM
Connection Type
WAN IP Address
Subnet Mask
Default Gateway
Primary Domain Name Server
Secondary Domain Name Server
MAC Address
AutoAPN
The AutoAPN section displays the results of the automatic APN detection of the inserted SIM.
ITEM
Country / MCC
Carrier / MNC
APN
APN Detection Status
APN Retry Count
Progression
PPPoE
The PPPoE section shows the current status of the PPPoE connection.
NetComm Wireless 3G27WV-02 User Guide
21
Figure 13 - Advanced View - WAN Port details
The method of assigning network addresses, typically either DHCP or Static.
The current WAN IP Address.
The current Subnet Mask.
The default gateway for the WAN.
The primary domain name server to use for IP address look up.
The secondary domain name server to use for IP address look up.
The MAC Address of the router's WAN port.
Table 10 - WAN Item details
Figure 14 - Advanced View - AutoAPN
The country and the mobile country code detected.
The carrier and the mobile network code detected.
The Access Point Name detected.
The status of the AutoAPN detection.
The number of times the AutoAPN service had to retry to detect the APN.
The current progression level of the detection.
Figure 15 - Advanced View - PPPoE section
DEFINITION
DEFINITION
www.netcommwireless.com
Advertisement
Table of Contents
