Ethernet Port Led Indicators - NetComm NTC-140-02 User Manual

Ethernet port LED indicators

Each of the Ethernet ports of the NTC-140-02router have two LED indicators on them.
The table below describes the statuses of each light and their meanings.
LED STATUS
On
Blinking
Green
Off
On
Amber
Off
Do not connect or disconnect cables or devices to or from the Ethernet ports in hazardous locations such as those in
which flammable gases or vapours may be present, but normally are confined within closed systems; are prevented from
accumulating by adequate ventilation; or the location is adjacent to a location from which ignitable concentrations might
occasionally be communicated.
www.netcommwireless.com
UM-00012 v1.0
Figure 3 - Ethernet port LED indicators
There is a valid network link.
There is activity on the network link.
No valid network link detected.
The Ethernet port is operating at a speed of 1000Mbps.
The Ethernet port is operating at a speed of 10/100Mbps or no Ethernet cable is connected.
Table 5 - Ethernet port LED indicators description
DESCRIPTION
NetComm Wireless 4G M2M Router
11