Static Ip Address; Dynamic Ip Address - NetComm N300 User Manual

Static IP Address

This utilises the Ethernet WAN port to provide a connection to the Internet with a static IP address assigned from your Internet
Service Provider (ISP).
Enter the WAN IP Address, Subnet Mask, WAN Gateway and the Primary DNS and Secondary DNS as supplied by your Internet
Service Provider (ISP).
NAT disable: This option disables "Network Address Translation" for this connection type.
Click Save to complete the connection setup process.

Dynamic IP Address

This utilises the Ethernet WAN port to provide a connection to the Internet with a dynamic IP address assigned from your Internet Service
Provider (ISP).
TITLE
Host Name:
ISP register MAC address:
Connection Control:
NAT disable:
3G18WV User Guide
24
DESCRIPTION
Set the hostname for your connection (optional - Refer to your ISP for more information).
You can change the WAN port MAC address if needed to clone your 3G modem (optional)
- Refer to your ISP for more information).
There are 3 modes to select from:-
Connect-on-demand: The 3G18WV will connect to the internet when a client sends
outgoing packets.
Auto Reconnect (Always-on): The 3G18WV will automatically reconnect to the internet
until the connection is manually disconnected.
Manually: The 3G18WV will not connect to the internet until someone clicks the connect
button in the Status-page.
This option disables "Network Address Translation" for this connection type.
YMLO-3G18WV
www.netcomm.com.au