Table of Contents
Advertisement
Overview of Cellular Router Interfaces
Field
Main Antenna Socket
Receive Diversity Antenna
Socket
Main WiFi Antenna Socket
Receive Diversity Antenna
Socket
5 Indicator LEDs
2-Way Captive Power
Terminal Block
Reset Button
Ethernet Port
Voice (RJ-45) Port
SIM Card Reader
Configuring your Router
You will need the following hardware components to set up the Cellular
Router:
Power Supply (8-28VDC)
Ethernet cable
Laptop or PC
Active SIM card
The router is primarily managed via web interface.
Before you power up the Cellular Router, please insert an active SIM card.
6
Description
SMA Female
SMA Female
SMA Female
SMA female
Indicate visually the activities and connection state for power,
service type, data traffic, data carrier connection and network
signal strength.
Power terminal block and the wide voltage range of 8-28V DC
simplify the installation in different industrial environments
Resetting the router to factory default values
For direct connection to your device or number of devices
through a hub or network router.
To connect a telephone directly to your router
For insertion and removal of SIM Card
NTC-40 Series Quick Start Guide
Advertisement
Table of Contents
