Jamb Tube
Pivot Screw
Set Screw
Page 20
Installing the Pivot Plate (Trackless Application Only)
All trackless packages are a patent pending design.
Pivot Washer
1. Place Pivot Plate on floor flush to Jamb Tube.
2. Insert shims as required to level the Pivot Plate.
Pivot Plate
3. Mark locations for holes.
4. Remove Pivot Plate, drill ¼" holes and insert anchors.
5. Fasten Pivot Plate to floor with provided hardware.
6. Place Pivot Washer on Pivot Pin.
Transfer Bracket – Belt Disconnect
Before installing any doors to header, disconnect belt from active
leaf #1 Transfer Bracket.
Transfer Bracket
Issued: 9-22-2011
US23-2101-02 Rev A