Installing The Door Arm Pivot - Assa Abloy 5800 ADAEZ PRO Installation And Operation Instructions Manual

®
5800 ADAEZ PRO
Installation and Operation Instructions
6
Operator And Door Arm Installation Instructions - Push Side Applications

Installing the Door Arm Pivot

1. Refer to Figure 12, and SLIDE the door arm pivot
over the door arm pivot bracket.
2. ENSURE that the dimension from the face of the
door to the centerline of the door arm mounting
hole is 6-3/8" (162 mm).
CENTERLINE OF
HINGE OR DOOR
PIVOT
Figure 12
3. TIGHTEN the four set screws securing the door
arm pivot to the door arm pivot bracket.
11 3/4"
16 of 50
DIMENSION BETWEEN
BRACKET MOUNTING
PLATE AND FACE OF
FACE OF
DOOR
DOOR
DOOR ARM PIVOT
DOOR:
MINIMUM: 5/8"
MAXIMUM: 1-1/2"
6 3/8"
700002-Rev N 09/18