Tools required:
• 3/16" Hex Wrench
• Small blade screwdriver
• Screwdriver (Phillips size 2 and size 3)
• Tape ruler
• Power drill
• Center punch
Use screw pack and hardware provided to mount operator.
WARNING: To reduce the risk of injury to person,
use this operator only with Pedestrian Swing doors.
For Indoor Use Only.
Copyright © 2017 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
2
5
Item No.
Description
1
Push Body Sub-Assembly (6330LAP)
2
Power Supply/Board Sub-Assy (6300CM)
3
Cover (6300 COV)
4
Back Plate Board (6300BPB)
5 & 6
End Cap Kit (6300END)
Push Arm Package (6330-1)
7
Full Feature Low Energy Operator
Installation and Instruction Manual
6330 Push Side
(up to 130° opening)
4
7
• Wire stripper
• #7 drill 1/4-20 tap (metal frame / door install)
• 3/16" drill (for self-drilling/self-tapping)
ETL certified; conforms to ANSI/UL standard
325 for automatic closing doors and UL10C
Positive Pressure Fire Test for Door Assemblies.
Certified to ANSI/BHMA A156.19 for Low Energy
Door Operators.
Page 1
6300 Series Push Side
pour la version francaise voir
www.nortondoorcontrols.com
3
1
80-9363-0003-020 Rev 8 11/17
6
Need help?
Do you have a question about the Norton 6300 Series and is the answer not in the manual?
Questions and answers