6011/6051 Series (Pull Side) Power Operator
Installation Instructions
WARNING
This product can expose you to lead which is known to the state of
California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65warnings.ca.gov.
6011 Pull Side Max 1/8" (3mm) reveal
Conduit Assembly
(6001CON)
End Cap - LH
(6001ENLH)
Inverter
(6000IN)
Track Assembly
(7200-1T)
6051 Pull Side (Handed) 1/8" to 3" (3mm to 76mm) reveal
All components above with 7250-1(R or L)
instead of 7210-1A arm
Tools Needed
#7
1/4-20
10" or 12"
#2 and #3
Copyright © 2019, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9360-1026-020 Rev 4 11/19
Power Module Sub-assembly
(6001PM)
Power Supply
(6000SUP)
Union Assembly
(6001U)
3/8
Set (Inch)
Punch
Pour la version francaise voir www.nortondoorcontrols.com.
READ AND FOLLOW ALL INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
Operator LAP
(6011LAP)
Backplate (6001BP)
Motor (not field
replaceable)
Union Spacer
(6001US)
Supplied Fasteners
Closer Assembly
(7500LAP)
End Cap - RH
(6001ENRH)
Arm Assembly
(7210-1A)
Cover
(6001COV)
Double Egress Arm
(7250-1R/7250-1L shown)