Installation Requirements; Fastening Requirements; Tools Required - Assa Abloy Besam VersaMax ICU Installation Manual

Installation Requirements

Fastening Requirements

Base door / wall material
Steel
Aluminum
Reinforced concrete
Wood
Brick wall
* Besam minimum recommended requirements. Consult local building code.

Tools Required

Page 12
Minimum Anchor Embedment*
3/16" (5 mm)*
1/4" (6 mm)*
1 1/2" (38 mm) from the underside
1 1/2" (38 mm)
Expansion-shell bolt, min. (1/4" x 3 1/2"), min. 2"
(50 mm) from the underside
 Carpenter's level (4 foot)
 Tape rule
 Straight edge
 Power drill and set of drill bits, Unibit, Hammer drill
 Metric hex key set 6, 5, 4, 3 and 2.5 mm
 Screw driver Torx T20
 Flat blade screw driver (small/medium/large)
 Chalk line
 #2 Phillips screw driver
 Center punch
 String
 Plumb bob
 Silicone sealant
 Pencil
 10mm Nut Driver and wrench
Additional mounting hardware (not supplied - see fastening
requirements above)
Issued: 9-22-2011 US23-2101-02 Rev A