Installing The Strike Plate - Assa Abloy Adams Rite EX88 Preparation Manual And Installation Instructions

Installing the Strike Plate

1. INSTALL the Strike Plates using two (2) #10-32
x 3/4" flat head screws.
2. VERIFY that exit device is fully operational.
3. ADJUST strike plate as necessary using shim
plates provided.
10-32 x 3/4"
flat head self-
tapping
screws, 2 qty
4. MARK, CENTER PUNCH, DRILL 5/32" diameter
5. INSTALL the #10-32 x 3/4" flat head self-
pilot hole for center screw.
tapping center screw to maintain optimum
adjustment.
P 800.872.3267
E techsupport.adamsrite@assaabloy.com
Page | 8
10-32 x 3/4"
flat head self-
tapping screw,
1 qty
F 800.232.7329
www.adamsrite.com