Advertisement
DC8200 Series
DC8210 with A11 or A12 Unitrol Arm Installation
Installation Instructions
J. Engage/Disengage Hold open (A1 Option Only).
Hold Open models only:
Turn screw 1/2 revolution to Engage or Disengage Hold Open.
Installing Cover
y Slip cover over closer.
y Hold tightly against QUIK-INSTALL Bracket surface.
y Secure on each side with 6-32 x 1/4" PBHMS screws.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2006, 2009, 2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights
reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY
Access and Egress Hardware Group, Inc. is prohibited.
Approved 2022-12-12
7
80-9380-8006-152 Rev 3 11/22
Advertisement
