Video Screen; Touch Calibration Screen - Extron electronics TLP 1000MV User Manual

Video Screen

Figure 17.
When a video input is connected to the MTP input, the video can be previewed in the small gray
rectangle on the screen. The preview allows you to adjust the following video properties, using
the appropriate
•
•
•
•

Touch Calibration Screen

After setting the Main, Volume, Time, Network, and
of the touchpanel. To open the calibration screen, press the Menu button a second time (see
figure 4,
Figure 18.
Press on the green box until the color reverts to gray with a white border and a second box
is highlighted. Repeat until all four boxes have been pressed and calibrated. At that point the
screen automatically returns to the
Exit the on-screen menus, by pressing the
screens.
Main Contrast: 064
Volume
Down
Time
Brightness: 128
Network
Down
Video
Exit
Video Screen
or buttons:
Down Up
Contrast between 0 and 127
between and (default
Color 0 127
between and
Brightness 0
between and (default
Tint 0 255
A
on page 5 for the TLP 1000MV or
+
Press and Hold
Highlighted Box
Until Color Changes
+
Touch Calibration Screen
Color: 064
Up Down Up
Tint: 128
Up Down Up
(default 64 )
)
64
(default )
255 128
)
128
Video
A
figure 9, page 12 for the TLP 1000TV).
Main
screen (see page 16).
Exit button in the bottom left corner of the menu
TLP 1000MV and TLP 1000TV • On-screen Menus
values, calibrate the touch area
+
+
19