Removing The Tlp 1000Tv Base For Vesa Mounting - Extron electronics TLP 1000MV User Manual

Removing the TLP 1000TV Base for VESA Mounting

The TLP 1000TV can be VESA mounted, using the Extron LPVM-1 kit. To use this kit, it is
necessary to remove the back cover and the base.
Figure 45.
1.
2.
Notch to Remove
Base Cover
Removing the Back and Base Covers
Remove the back cover by inserting the Extron removal tool (provided) into the notches on
each side.
Remove the base cover by inserting the Extron removal tool into the notches on the base.
Figure 46.
TLP 1000TV with the Base and Back Covers Removed
Notch to Remove
Back Cover
TLP 1000MV and TLP 1000TV • Mounting
VESA Mounting Holes (4)
Spanner Drive
Security Screws
(2 for each Hinge)
Hinges (2)
Cable Runway
42