Tlp 1000Tv Rear Panel Features And Connections - Extron electronics TLP 1000MV User Manual

TLP 1000TV Rear Panel Features and Connections

The TLP 1000TV has a stand that allows it to be placed on a desktop. The stand can be
removed to VESA mount the unit. Both the stand and the touchpanel have removable covers
that conceal the rear panel features and protect cables that are attached to the TLP 1000TV.
The rear and base covers can be removed
D D
E E
F F
I I
Figure 9.
A
B
C
D
E
The following features and connections are available on the back panel.
A
B
C
D
TLP 1000TV Rear Features
Menu button
Reset button
Reset LED
MTP adjustment controls
MTP input
Menu button — activates the
Reset button — allows the unit to be reset in any of four different modes (see
Modes on page 44).
Reset LED — provides feedback about the reset status when the user presses the reset
button (see Reset Modes on page 44).
MTP signal adjustment controls — three MTP signal adjustments are available for
S-video luminance gain (VID/Y), S-video chrominance gain (C), and sharpness (S). For
composite video signals, the gain is controlled by the VID/Y adjustment.
using the Extron removal tool
Network and Power over Ethernet connector
F
Power connector
G
VESA mounting holes
H
Kensington security slot
I
on-screen menus for calibrating the unit (see page 16).
TLP 1000MV and TLP 1000TV • Panel Features
(see page 42).
G G
A A
B B
C C
H H
Reset
12