Using The Touchlink Panel Web Pages - Extron electronics TLP 1000MV User Manual

Installing the Software
GUI Configurator and Global Configurator Installation
NOTE:
Both programs can be downloaded from the Extron website (www.extron.com). Select the
Download
the left
next to the program. Follow the on-screen instructions to complete installation. A folder is
created on the

Using the TouchLink Panel Web Pages

Both the TouchLink panels have default web pages that can be used to read and change the
current settings of the panels. The web pages can be accessed as follows:
1.
You must use Global Configurator 3.1 or a later version and GUI Configurator 1.2 or
a later version to configure the TLP 1000MV or TLP 1000TV.
1
tab (see figure 23,
2
(figure 23, ). Navigate to GUI Configurator or Global Configurator and click
drive and an icon may be placed on the desktop.
C:\
Open your browser and type the IP address of the TLP 1000 unit into the address field. The
browser opens the TouchLink panel
information about the model, date and time, and IP settings.
Figure 19.
System Status Page
TLP 1000MV and TLP 1000TV • Configuration Software
on page 24) and click the
Software
Status page, which is read-only and provides basic
option in the sidebar at
Download
21