On-Screen Menus; Accessing The On-Screen Menus; Main Screen - Extron electronics TLP 1000MV User Manual

On-screen Menus

This section describes:
•
•

Accessing the On-screen Menus

When the TouchLink panel first has power applied, the unit boots up and displays the opening
screen. To access the on-screen menus, press the Menu button (see
the TLP 1000MV or
The menus open at the Main screen. There are five different screens (Main, Volume, Time,
Network, and Video) that can be selected by pressing the appropriate button at the left side of
the screen.
There is also an
and saves any changes and leaves the menu screens.

Main Screen

Figure 13.
Values can be changed by pressing the buttons to highlight them. Press the
to adjust the values or press the
between
Sleep Timer
when the screen goes dark to save power. The time can be changed from
(in 10-second increments). The time that is currently selected is shown above the buttons.
When ambient lighting is high, the screen may need a high level of backlighting for readability.
With low ambient lighting, the backlighting should be low.
Accessing the On-screen Menus
Touch Calibration Screen
A
figure 9,
button at the bottom left corner of the screen. Pressing this button applies
Exit
Main
Sleep timer: 300 Sec
Volume
Down
Time
Backlight: 073%
Network
Down
Video
Exit
Main Screen
Off and On . The current setting is shown above the buttons.
determines how long the panel remains inactive before entering sleep mode,
page 12 for the TLP 1000TV).
Auto Backlight
Up On
Up
Wake on Motion
On
or
Auto Backlight Wake on Motion
TLP 1000MV and TLP 1000TV • On-screen Menus
figure 4, A on page 5 for
PoE
Active
or buttons
Down Up
buttons to toggle
to seconds
0 50,000
16