Using Gui Configurator - Extron electronics TLP 1000MV User Manual

6.
7.
8.
9.

Using GUI Configurator

This section provides an overview of the GUI Configurator program. For complete information
about the program, consult the GUI Configurator help file (select
press the <F1> key while within the program).
NOTES:
To use the GUI Configurator program, follow these instructions:
1.
Click the Configuration tab at the top of the page
Select
Firmware Upgrade
Use the button to navigate to and select the firmware file that was saved in step 4.
Browse
Click Upload. The Touchpanel screen shows the message
. When the firmware is uploaded, the screen shows the message
Please Wait...
. Once the firmware is installed, the panel can be calibrated using the
Restarting...
on-screen menus (see page 16) or the
To configure the touchpanel, use GUI Configurator version 1.2 or later.
•
These touchpanels are not compatible with GUI Designer.
•
Double-click the desktop icon. A splash screen appears momentarily and then the program
opens at the main screen behind the
Figure 26.
Opening GUI Configurator
TLP 1000MV and TLP 1000TV • Configuration Software
from the bar on the left.
TouchLink panel web pages
GUI Configurator Start Options
Firmware Uploading...
(see page 21).
in the menu or
Contents Help
dialog box.
26