On-Screen Menus; Setup Menu; Status - Extron electronics TouchLink TLP Pro 725C Series User Manual

Touchpanel control systems
Hide thumbs Also See for TouchLink TLP Pro 725C Series:
Table of Contents

Advertisement

On-screen Menus

On-screen menus allow initial configuration of the touchpanels.

Setup Menu

To open the setup menu, use a screw driver with a fine blade to press the
Menu button is located on the base of the TLP Pro 725C (see
The menus open at the
These can be selected by pressing the appropriate button in the navigation panel at the top of
the screen. The button for the selected screen is yellow. The buttons for the remaining screens
are black.
There is also a red
and saves any changes and closes the menu screens.

Status

Press the
screen.
Model:
Part Number:
Firmware
Version:
Bootloader
Version:
Figure 15.
The
Each of the other four panels shows a summary of the information on the other screens.
Pressing any of the panels opens the corresponding screen in exactly the same way as pressing
the buttons in the top navigation panel.
A green bubble in the
appears if there is no connection. The green bubble in the
processor is connected or a red square appears if none is connected.
screen. There are five different screens:
Status
Status
(see below)
Network
(see following page)
Display
(see page 22)
button in the top right corner of the screen. Pressing this button applies
Exit
button in the navigation panel at the top of any screen to open the
Status
Display
Status
Network
Info
Network
IP Address:
192.168.254.251
TLP Pro 725C
DHCP:
Off
Host Name:
TLP-AB-CD-EF
60-1564-02
1.02.0001-b001
Audio
Master Volume:
1.03.0000
Master Mute:
Status Screen
screen is a read-only screen that provides basic information about the touchpanel.
Status
panel lights when there is a network connection or a red square
Network
TLP Pro 725C Series Touchpanels • On-screen Menus
figure
Audio
(see page 23)
Advanced
(see page 24)
Audio
Advanced
Exit
Display
Resolution:
1024x600
GUI Project:
N/A
Sleep Timer:
5 Minutes
Advanced
99
Controller IP:
N/A
Off
Project Size:
N/A
Advanced
button. The
Menu
13,
A
on page 17).
Status
panel lights when a control
19

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TouchLink TLP Pro 725C Series and is the answer not in the manual?

This manual is also suitable for:

Touchlink tlp pro 725cTouchlink tlp pro 725c nc

Table of Contents