Panel Features; Tlp 1000Mv Front Panel Features - Extron electronics TLP 1000MV User Manual

Panel Features

This section describes:
•
•
•
•

TLP 1000MV Front Panel Features

D D
A A
B B
Figure 2.
A
B
C
D
E
F
TLP 1000MV Front Panel Features
TLP 1000MV Rear Panel Features and Connections
TLP 1000TV Front Panel Features and Operations
TLP 1000TV Rear Panel Features and Connections
TLP 1000MV Front Panel
Motion sensor — is capped with a small Fresnel lens that focuses light onto the sensor.
When no motion has been detected for a user-defined period of time, the unit enters sleep
mode. When motion is detected by the sensor, the screen display is restored and active.
Microphone — is located below the LCD screen.
Connection status LED — is unlit during normal operation. Blinks red if the connection to
the IP Link controller is lost.
Configurable LEDs — (two) are on the top corners of the panel and can be configured by
the user to provide information about the system. The LEDs can be configured to light red or
green and have two rates (blinking and always on).
LCD screen — has a 1024x600 resolution with a touch overlay. A graphical user interface,
designed using the Extron GUI Configurator
or icons on the screen. These are configured for a range of user-defined functions, using the
Extron Global Configurator
Speakers — (two) are located under the screen, on either side of the panel. They provide
audible feedback for the user.
software (see page 26), displays buttons, text,
software (see page 31).
TLP 1000MV and TLP 1000TV • Panel Features
D D
E E
C C
F F
4