Updating The Firmware; Updating Firmware Using Extron Firmware Loader - Extron electronics TLP 1000MV User Manual

5.

Updating the Firmware

Firmware for both touchpanels can be upgraded using the Extron Firmware Loader, using the
TLP 1000 default web page, or using GUI Configurator. Before starting, consult your IT team and
ensure that the touchpanel has a unique IP address.

Updating Firmware Using Extron Firmware Loader

1.
2.
Click the Touchpanel tab to open the
the user to alter the touchpanel and volume settings. These correspond to the
page 16) and Volume (see page 17) screens in the on-screen menus.
Figure 22. Touchpanel Configuration Page
Power on a computer that is connected to the same network as the touchpanel.
Install the Extron Firmware Loader utility onto the computer if it is not already present. On
the Extron website (www.extron.com), select the
option in the sidebar at the left. Locate the Firmware Loader software and click
Follow the on-screen instructions to complete installation.
TLP 1000MV and TLP 1000TV • Configuration Software
Touchpanel Configuration
Download tab and click the
page, which allows
Main (see
Software
.
Download
23