Updating Firmware Using Gui Configurator - Extron electronics TLP 1000MV User Manual

3. Extron web
Also on the
1
tab ( ) on the Extron home page and select the
Download
2 2
4 4
3 3
Figure 23. Extron Web Page — Firmware Download
4.
Click the appropriate letter of the alphabet (
1000TV firmware, click
Download
downloaded to your computer. Note the folder in which the firmware file is saved.
5. Open the Extron Firmware Loader by clicking on the desktop icon.
6. Select or
TLP 1000MV TLP 1000TV
7.
Select TCP/IP from the
8.
Enter the IP address for the TLP 1000, a Telnet port number (this will usually be
password. Click
Connect
9.
In the New Firmware File Path
Click the button. The main Firmware Loader screen opens with the TLP 1000MV or
Add
TLP 1000TV listed in the device panel.
10. Click . The firmware transfer begins and takes approximately three minutes. When
Begin
the Total Progress bar shows
Firmware Loader.
site, download the firmware for the TouchLink panel. Click the
1 1
4
) to navigate to the TLP 1000MV or TLP
and follow the on-screen instructions. The firmware is
from the
Device
Connection Method drop-down menu.
.
panel, navigate to the file that was saved in step 4.
, select
Completed Exit
TLP 1000MV and TLP 1000TV • Configuration Software
3
option ( ).
Firmware
drop-down menu.
), and a
23
from the menu to exit
File
24