Using Global Configurator - Extron electronics TLP 1000MV User Manual

Using Global Configurator

NOTES:
This section provides an overview of the Global Configurator program. For complete information
about the program, consult the Global Configurator help file (click
or press the <F1> key while within the program).
This section describes how to set up a Global Configurator project with an IPL 250. Setting up
a project with another IP Link product is similar, but you should consult the Global Configurator
Help File for exact information about the product you are using.
1.
2.
If this project has been uploaded to the TouchLink panel before, you can choose to
upload only the changes that have been made since the previous upload. You can also
choose to upload the new version to some, specified touchpanels or all the TouchLink
panels on the list found within the
screen during the upload process.
To configure the touchpanel, use Global Configurator version 3.1 or later.
•
These touchpanels are not compatible with Global Configurator Professional and
•
Global Configurator Plus.
Double-click the GC3 desktop icon. The
opens.
Figure 34. Global Configurator 3 Start Options
Select Create A New Project
TLP 1000MV and TLP 1000TV • Configuration Software
Devices section of the
Contents
Global Configurator 3 Start Options
and click OK .
File Upload Manager
in the menu
Help
box
31