Tlp 1000Tv Front Panel Features And Operations - Extron electronics TLP 1000MV User Manual

TLP 1000TV Front Panel Features and Operations

D D
A A
Figure 8.
A
B
C
D
E
F
G
TLP 1000TV Front Panel Features
Motion sensor — is capped with a small Fresnel lens that focuses light onto the sensor.
When no motion has been detected for a user-defined period of time, the unit enters sleep
mode. When motion is detected by the sensor, the screen display is restored and active.
Microphone — is located below the LCD screen.
Connection status LED — is unlit during normal operation. Blinks red if the connection to
the IP Link controller is lost.
Configurable LEDs (2) — on the top corners of the panel can be configured by the user to
provide information about the system. The LEDs can be configured to light red or green and
have two rates (blinking and always on).
LCD screen — has a 1024x600 resolution
with a touch overlay. A graphical user interface,
designed using the Extron GUI Configurator
software (see page 26), displays buttons, text,
or icons on the screen. These are configured
for a range of user-defined functions, using the
Extron Global Configurator
page 31).
Speakers — two speakers located under the
screen, on either side of the panel, provide
audible feedback for the user.
Light sensor — (see the figure to the right)
mounted on top of the display frame. The
sensor monitors the level of ambient light and
adjusts the screen brightness and button
backlighting. The sensor can only be viewed
from above the panel.
B B C C
software (see
TLP 1000MV and TLP 1000TV • Panel Features
D D
E E
F F
G G
11