Panel Features
This section describes:
•
•
Front Panel Features
E
TLP Pro 1022M
A
B
C
D
Figure 2.
A
B
C
D
Front Panel Features
Rear Panel Features
A
B
C
F
G
Communication LED
Status Light
Light Sensor
Capacitive Touchscreen
TLP PRO 1022 Series Front Panels
Communication LED — shows the configuration and connection status of the touchpanel:
Unlit during normal operation (the touchpanel is configured and connected to an IP Link
•
Pro control processor).
Blinks red if the touchpanel has been configured but is not connected to an IP Link Pro
•
control processor.
Solidly lit if the touchpanel has not been configured.
•
The indicator can be toggled between enabled and disabled, using the
page 8).
Status light — can be programmed to provide system feedback.
Light red or green
•
Blink or solidly lit
•
For information about programming this light, see the Global Configurator Help File.
Light sensor — monitors ambient light level and adjusts screen brightness, based on the
settings configured using the
Capacitive touchscreen — 10-inch, 1024x600 resolution capacitive touchscreen with a
touch overlay.
A
D
E
TLP Pro 1022T
Speakers
(2)
E
Motion Sensor
F
Menu Button
(TLP Pro 1022M only)
G
Setup Menu
(see page 8).
TLP Pro 1022 Series • Panel Features
B
C
E
F
Setup Menu
(see
4