Option 44, 45, And/Or 65 Wcdma/Hsdpa Signal Analyzer Verification; Wcdma Absolute Power Accuracy Verification (Option 44) - Anritsu Spectrum Master MS2722C Maintenance Manual

Chapter 3 — Options Verification 3-5 Option 44, 45, and/or 65 WCDMA/HSDPA Signal Analyzer Verification
3-5

Option 44, 45, and/or 65 WCDMA/HSDPA Signal Analyzer Verification

The tests in this section can be used to verify the functionality of the WCDMA/HSDPA Signal Analyzer mode of
the MS272xC Spectrum Master. The tests include:
•

"WCDMA Absolute Power Accuracy Verification (Option 44) "

• "WCDMA Occupied Bandwidth (OBW) Verification (Option 44) " on page 3-18
• "WCDMA RF Channel Power Accuracy and ACLR Verification (Option 44) " on page 3-20
• "HSDPA RF Channel Power Accuracy and ACLR Verification (Option 44) " on page 3-21
• "Error Vector Magnitude (EVM) Verification (Option 45 or Option 65) " on page 3-22
WCDMA Absolute Power Accuracy Verification (Option 44)
This test verifies the WCDMA absolute power accuracy in WCDMA/HSDPA Signal Analyzer Mode.
Equipment Required for MS2722C, MS2723C, and MS2724C
• Anritsu MG3700A Vector Signal Generator
• Frequency Reference Symmetricom Rubisource T&M
• Mini Circuits Model TIA10001R8 RF Power Amplifier
• Programmable Attenuator, Anritsu Model MN63A
• Circulator (refer to
• High Power Load, Aeroflex/Weinschel Model M1418
• Coupler (refer to
• Power Meter, Anritsu Model ML2438A
• Power Sensor, Anritsu Model SC7400 (2)
• Anritsu 34NN50A 50 ohm Adapter (2)
• Anritsu 15NN50-1.5C RF Coaxial Cable
• BNC male to BNC male Coaxial Cable
Equipment Required for MS2725C and MS2726C
• All of the above, plus
• Anritsu 71693-R Ruggedized K(f) to N(f) Adapter
MS272xC MM
Table 1-3 on page 1-4)
Table 1-3)
PN: 10580-00279 Rev. E 3-13