Beisler 1280-7 Operating Instructions Manual page 98

Selection
1.2.3
Initialise
Initialize the data to
the default values.
96
Setting 1
1.2.2.4
ROM test
Memory chip analysis.
E.g. of the read-only memory.
1.2.3.1
Init global parameters
1.2.3.2
Init sequences
1.2.3.3
Init sewing programs
1.2.3.4
Master init
1.2.3.5
Init machine
configuration
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
Programming Commander Pro
Setting 2
ROM test result
E.g. reference run for stepper
motor (M1) successfully
performed.
OK
Kindly confirm initialisation!
All the global parameters will
be reset to factory default and
cannot be recalled!
Or: Cancel
Kindly confirm initialisation!
All the sequences will be reset
to factory default and cannot be
recalled. Created sequences will
be overwritten.
Or: Cancel
Kindly confirm initialisation!
All the parameters of Sewing
programs will be reset to factory
default and cannot be recalled!
Or: Cancel
Kindly confirm initialisation!
All Global parameters,
Sequences and Sewing pro-
grams will be reset to factory
default and cannot be recalled!
Or: Cancel
Kindly confirm initialisation!
All machine configurations will
be reset to factory default and
cannot be recalled. Created con-
figurations will be overwritten.
Or: Cancel