• Differential bottom feed
• Differential top feed
The entire seam can be divided in up to 5 freely selectable seam sections.
Parameters can be set individually for each section. The activation of ad-
ditional fullness always applies to the selected section for which fullness
had been set mechanically beforehand.
34
• Setting of program parameters ( p. 123, 7.3 Differential
bottom feed)
• Programming of the pneumatic
differential bottom feed ( p. 138)
• Setting of program parameters ( p. 123, 7.19 Differential
top feed)
• Programming of the pneumatic
differential top feed ( p. 143)
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
Operation