Operation
Fig. 9: Disassembling and assembling the fabric sliding plate (3)
(5) - Bracket
The fabric sliding plate (1) is held in place in the tabletop cut-out (4) by
the magnets (3).
The contour guide (2) is connected to the fabric sliding plate (1) and forms
a unit that is removed/placed together.
Disassembling the fabric sliding plate
To disassemble the fabric sliding plate:
1. Carefully pull the contour guide (2) along with the fabric sliding plate
2. Swivel the fabric sliding plate (1) aside.
The bottom section of the machine head is now freely accessible
Assembling the fabric sliding plate
To assemble the fabric sliding plate:
1. Pick up the fabric sliding plate (1) carefully.
2. Insert the fabric sliding plate (1) into the tabletop cut-out (4).
Make sure it is engaged by the magnets (3).
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
⑤
(1) up and off the magnets (3).
• 1280: Hang up the fabric sliding plate (1) on the sewing table using
the bracket (5) on the side with the notch on the hook (6).
• 1281: Set down the fabric sliding plate (1) on the delivery table (7).
(e.g. for threading/cleaning).
⑥
(6) - Notch on the hook
(7) - Sewing table
⑦
21