Programming Commander Pro
To remove a program from a sequence:
1. Select the program (1) you wish to remove in the sequence list.
The program (1) is activated.
Fig. 113: Removing a program from the sequence
(1) - Program
2. Briefly press the symbol (2)
The program (1) is deleted from the current sequence without
To remove all programs from a sequence:
1. Perform a long press on the symbol (2)
A warning reading
2. Press Cancel/Remove All.
Cancel: the user returns to the user interface Sequence
Remove All: Warning notice
3. Press Add new program.
The grid view for programs opens.
4. Select the program you wish to add ( p. 152).
5. Press OK.
The program is adopted, and the display switches back.
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
warning.
A sequence should contain at least one program.
Click "Remove All" to remove all programs and add
new ones or click "Cancel" to go back.
Programming.
appears.
①
(2) - Icon
(3) - Icon
.
.
Confirm "Remove All" appears!
Removed last program
③
②
155