To assemble the alternating stacker:
1. Move the alternating stacker (3) with holder (4) up to the stand of
2. Tighten the holder (4) to the stand of the sewing unit (6) using
Do not tighten the screws (5) all the way yet.
3. Align the alternating stacker (3) such that it is parallel to the edge
4. Tighten the screws (5).
Fig. 149: Assembling the alternating stacker (2)
(2) - Stacking clamp
(7) - Pneumatic distributor
(8) - Pneumatic hose
(9) - Pneumatic valve
5. Fit the pneumatic hose (8) on the pneumatic distributor (7) of the stack-
6. Fit the pneumatic hoses on the cylinder.
188
the sewing unit (6).
the screws (5).
of the tabletop (1) on the sewing table.
②
⑦
⑧
ing clamp (2).
• Fit the black pneumatic hose (12) on the pneumatic valve (11)
• Fit the blue pneumatic hose (13) on the pneumatic valve (9)
⑬
⑨
⑩
(10) - Cylinder
(11) - Pneumatic valve
(12) - Black pneumatic hose
(13) - Blue pneumatic hose
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
Setup
⑫
⑪