Beisler 1280-7 Operating Instructions Manual page 127

Programming Commander Pro
Symbol/parameter
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
Submenu/setting
7.2.3
Chain cut
Parameter for setting the chain cut length at the seam end
Value range: ON/OFF
Other setting options:
7.2.3.1
Length of chain at seam end
Adjust the required chain length at the seam end. This depends
on the material.
Default: 1.00cm
Value range: 0.00-10.00 cm
7.2.3.2
Overrun length after seam end for safe chain cut
Setting the sewing length until the chain cut is activated.
Default: 3.50cm
Value range: 1.00-20.00cm
125