Beisler 1280-7 Operating Instructions Manual page 101

Programming Commander Pro
Selection
1.3.3
Thread chain
cut
Setting the parame-
ters for optimum
thread chain cut
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
Setting 1
1.3.2.2
Seam section with thread
tension release in cm at
the seam beginning
Enter the seam section (in cm)
for the thread tension release at
the seam beginning. This is used
to support safe chain cutting
when serging 3-thread seams.
1.3.2.3
Thread tension release
at the end of the seam
1.3.2.4
Seam section with thread
tension release in cm at
the end of the seam
Enter the seam section for
thread tension release at the end
of the seam. This is used to
support safe chain cutting when
serging 3-thread seams.
1.3.3.1
Sewing speed during
thread chain cut.
Reduced sewing speed during
thread chain separation to
reduce wear parts.
Setting 2
Default: 0 cm
Value range: 0-10 cm
Default: ON
Value range: ON/OFF
Default: 3.00 cm
Value range: 0-10 cm
Default: 4000 rpm
Value range: 200-5000 rpm
99