Operation
Adjusting the air supply using the throttle valve (1280)
Fig. 39: Adjusting the air supply intensity (1)
(1) - numbered air nozzle
(2) - Number
Located under the tabletop (5) is a distributor block with multiple throttle
valves. Each throttle valve (3) is marked with a number (2) that matches the
corresponding numbered air nozzle (1) in the tabletop (5). The numbered
table air nozzle (1) is adjusted individually or as part of a group.
To adjust the air supply intensity using the throttle valve:
1. Loosen the screw (4).
2. Turn the throttle valve (3).
3. Tighten the screw (4).
Information
You can use the program parameters on the control panel ( p. 123,
7.4 Table blowing) to program the air nozzles.
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
②
③
• Blowing air more intense: Turn clockwise
• Blowing air less intense: Turn counterclockwise
①
(3) - Throttle valve
(4) - Screw
(5) - Tabletop
⑤
④
47